Fangkuai V6 vertical hot water boiler series is designed with a bottom-mounted burner pyrotechnic tube volumetric structure. The fuel is atomized by the burner and burned in the furnace under slight positive pressure. The high-temperature flue gas enters after radiation heat exchange in the furnace. The pyrotechnic tube conducts convection heat exchange and is discharged through the lower smoke chamber. By using computer-aided design to optimize each heating surface, the furnace structure design is more reasonable. The boiler does not need a condenser, condensation can be achieved inside the furnace body, the exhaust gas temperature can be as low as below 50°C, and the thermal efficiency can reach more than 104.4% (low temperature conditions).
The software system can preset a variety of module combinations, and the system can automatically adjust the combustion status of any number of gas boilers in the system according to key needs.
High-resolution touch screen, dynamic graphic display, simple and clear multi-level pop-up menu, multi-level operation authority management, and automatic fault recording.
The gas water heater has a large water capacity body and a precise temperature control system to ensure stable outlet water temperature. The outlet water temperature is digitally displayed and can be adjusted as needed.
Sacrificial anode protection, magnesium is the metal with the lowest potential in the electrochemical sequence and is physiologically non-toxic. Magnesium rods can protect the inner tank and extend its service life.
Learn more
The thermal power of the boiler is less than 0.1MW. According to the "Special Equipment Safety Supervision Regulations", no quality inspection is required.
The boiler body is equipped with an advanced intelligent control system, which has functions such as fault detection, alarm, precise temperature control, fault diagnosis, and data query.
The boiler is a modular combination design, which can be used directly connected to the municipal pipe network on site. The installation is quick and easy.
The unique fully premixed combustion system premixes air and fuel to reduce emissions of harmful substances such as NOx and SOx.
Ultraten wing heat exchange technology heat exchange element increases the heat exchange area by 5 times, the exhaust temperature can be as low as <50℃, and the thermal efficiency can reach more than 104%.
It has various measures such as low water level protection, over-temperature, over-pressure protection, etc. It also adopts temperature and pressure safety valve to ensure the stable operation of the boiler.
The inner tank of the boiler is coated with food-grade enamel. The hot water output by the boiler meets the hygienic standard for edible drinking water and the water quality is excellent.
Use sacrificial anode protection device and use magnesium rod to protect the inner tank to extend the service life of the boiler inner tank.
Types | Rated Thermal Power | Rated Steam Pressure | Thermal efficiency | Fuel | Power requirement | Length * Width * Height | Weight |
---|---|---|---|---|---|---|---|
Unit | Kw | MPa | % | V/Hz | mm | kg | |
V6 | 99 | 1 | 97.2-104.4 | Natural gas | 220/50 | 890 * 890 * 2160 | 620 |
V5 |
Apply for 1 To 1 online communication
Fangkuai Service System:
365Day
Free repair
24Hours
Hotline on standby
365Day
All year round
Selection guide
Selection guide
Selection guide
Selection guide
We provide you with a free full lifecycle system solution