Vacuum boiler-DuAo D6

Product Description

DuAo D6 series boilers adopt full premixed plane combustion technology. Through precise adjustment and control, they ensure that gas and air are fully mixed to achieve full combustion and high thermal efficiency. The furnace required for flat combustion is shorter, which can effectively reduce the boiler volume. The temperature gradient in the furnace is more uniform, the heating surface is uniform, and the heat transfer effect is superior. Duiao D6 series boilers have exhaust smoke as low as 20℃, which is comparable to normal outdoor temperature. It not only reduces the emission of nitrogen oxides such as CO2 and S02, but also reduces the pollution to the air environment. It also solves the problem of white smoke from gas boilers, which saves energy. And environmentally friendly.

Ultraten Technology - Wing Tube

DUAO 6 series boilers adopt fully premixed horizontal combustion technology. Through precise regulation and control, gas and air are fully mixed, combustion is complete, and thermal efficiency is high. The furnace required for flat combustion is shorter, which can effectively reduce the boiler volume. The temperature gradient in the furnace is more uniform, the heating surface is uniform, and the heat transfer effect is superior。

Ultra-high speed cooling tube technology

Combined with the heat transfer and condensation functions of the wing tubes, under unit operating conditions, the special tearing groove design of the wing tubes allows it to have a heat exchange area 5 times that of ordinary light tubes, and can effectively eliminate the condensation film on it. The heat transfer material is also made of silicon-aluminum alloy, which has high heat exchange efficiency and corrosion resistance.

condenser

DUAO 6 series boilers adopt volumetric wing tube condensers, which have the characteristics of small flow resistance and large flow rate. The wing tube condenser extracts the sensible heat and part of the latent heat of the flue gas at the end to achieve primary condensation of the flue gas. After primary condensation, the flue gas still has some latent heat available for use. We creatively added a deep condensation module to achieve deeper secondary condensation of flue gas. The flue gas precipitates a large amount of condensed water in the deep condensation module, and the heat is continuously recovered. to the furnace body to increase the boiler inlet water temperature and reduce gas consumption.

deep condensation

DUAO D6 series boilers use a dual combination of condenser and low-temperature cooler to deeply condense the flue gas and reduce the exhaust gas temperature to 20°C, which is equivalent to the normal outdoor temperature. Not only is the final recovery of the latent heat of the flue gas achieved and the thermal efficiency of the boiler improved, but the treated condensate can still be used to supplement boiler water, reducing boiler water consumption. As the temperature of the exhaust flue gas decreases, harmful components in the flue gas dissolve in the condensed water, directly or indirectly reducing the emission of nitrogen oxides such as CO2 and SO2, and reducing the impact on the air environment.

Learn more

Custom boiler solutions Make an appointment to visit

Product Advantages

Low investment costs

The boiler has a compact structure, requires less boiler room, and reduces various infrastructure costs.

Modular system

Each boiler can be used as a backup for each other, which greatly improves equipment utilization, investment utilization and boiler operation safety.

Easy to install

The boiler is designed as a complete package. The user only needs to install the water inlet and outlet pipes, chimneys, gas pipes and power on to start the boiler on site.

Ultra-low emissions

Full premixed combustion technology controls nitrogen oxide emissions from the source of combustion, making the use of clean energy cleaner and more environmentally friendly.

Small footprint

The boiler adopts an integrated design to increase the heat exchange area and reduce the footprint by 20-40% compared with traditional condensing boilers.

Multiple security protections

The boiler has complete safety protection functions. If a sudden failure occurs, it can immediately alarm and protect the safe operation of the boiler in an all-round way.

Energy efficient

The integration of complete condensation technology increases boiler operating efficiency by more than 10%, up to 106%, making it the first choice for energy-saving heating.

Long operating life

The condensing heat exchange elements are made of silicon-aluminum alloy with strong corrosion resistance; they are inspected for defects before leaving the factory to ensure the overall quality of the boiler.

Types	Rated heating capacity(KW)	Hot water output 10/60℃(t/h)	Natural gas consumption (Nm³/h)	Power supply (V/HZ)	Distribution power (KW)	Operating weight(t)	Product size L×W×H(mm)
D6-700	700	12	59.9	380/50	9.8	3.12	4500×1130×1880
D6-1400	1400	24	119.1	19.8	4.83	4780×1400×2150
D6-2100	2100	36	179.8	20.5	7.27	5720×1570×2575
D6-2800	2800	48	237.3	36.5	7.43	5720×1570×2575
D6-3500	3500	60	296.6	51	10.37	6520×1820×2940
D6-4200	4200	72	355.9	56	10.87	6520×1820×2940

About FangKuai

FangKuai headquarters base has an independent R&D center, a full-scale laboratory and two manufacturing plants, with a production area of 120,000 square meters. It is the leading enterprise with boiler automation processing capabilities in China, and its products are exported to many countries and regions. With more than 100 patented technologies, it has mastered the core technology of advanced clean fuel boilers, and its R&D and production capabilities are at the forefront of the industry.

Apply for 1 To 1 online communication

Service System

Fangkuai Service System：

365_Day

Free repair

24_Hours

Hotline on standby

365_Day

All year round

Selection guide

Custom boiler solutions Make an appointment to visit

Need more information ?

We provide you with a free full lifecycle system solution

Fuel :

Choose your fuel

Gas

Oil

Electricity

Rice husk

Coal

Wood

Biomass

Product * :

Choose the product you need

Steam boiler

Hot-water boiler

Commercial boiler

Electric boiler

Custom boiler

Steam :

1-10t/h

11-20t/h

21-90t/h

90+t/h

Hot Water :

0.7-14MW

14.1-21MW

21.1-29MW

29+MW

Message :

What do our clients say

Chemical Industry

Our company has been using this brand for five or six years. Fangkuai boilers have high thermal efficiency and can effectively convert fuel into thermal energy, reducing energy consumption and saving companies a lot of money. It is very stable and reliable, looking forward to our next cooperation.

Africa

8t/h | Steam boiler

Food Industry

Since our factory introduced your company's boiler, it has played an important role in our food production process, helping us improve production efficiency and ensure food quality and safety. I would like to express my sincere gratitude to your company for providing boiler equipment.

Africa

6t/h | Steam Boiler

Heating Industry

Your company's boiler equipment plays a vital role in our heating system. In the severe cold winter, it has withstood the test of extreme weather conditions, ensuring that our heating system always operates normally. Meet user needs. The efficient energy consumption ratio of the boiler also helps us reduce operating costs and improve economic benefits.

Africa

10t/h | Hot Water Boiler

Chat online